 |
| Tired looking calliper. |
 |
| Dodgy looking bleed nipple. |
 |
| Polish up nice. |
 |
| Looking good. |
 |
| Piston has had it. |
 |
| Finally out |
 |
| Steel Piston needs replacing. |
 |
| Out with the old seal. |
 |
| Clean out the seal grove. |
 |
| New Seal and stainless piston. |
 |
| In with the new seal. |
 |
| Start to push in the new piston. |
 |
| New Bleed nipple. |
 |
| Piston all the way in. |
 |
| Light brush with copper grease. |
 |
| More Copper grease. |
 |
| Looking good. |
 |
| The worst area is on the side of the kick stand. Which suggests that this bike was left out in the wet on the side stand for many years |
 |
| Old base is not to bad. |
.
 |
| Small 1/8 th plate infill for the rot next to the lock. |
 |
| Mig working great. |
 |
| Clean inside as this will be in view |
 |
| Small rot around drain hole. |
 |
| Foam side after welding. |
 |
| Underside area after welding. |
 |
| Remove old strap nut as it was rotten. |
 |
| Bottom edge front rotten so cut back to good steel. |
 |
| Wind down the required nut. |
 |
| New Steel in place. |
 |
| Mig in place and remove bolt. |
 |
| Weld both sides. |
