The worst area is on the side of the kick stand. Which suggests that this bike was left out in the wet on the side stand for many years |
Old base is not to bad. |
.
Small 1/8 th plate infill for the rot next to the lock. |
Mig working great. |
Clean inside as this will be in view |
Small rot around drain hole. |
Foam side after welding. |
Underside area after welding. |
Remove old strap nut as it was rotten. |
Bottom edge front rotten so cut back to good steel. |
Wind down the required nut. |
New Steel in place. |
Mig in place and remove bolt. |
Weld both sides. |
No comments:
Post a Comment